DESCRIPTION
Cemimax DP70 is a low emission, multi-purpose dispersion primer for for existing surfaces on indoor & outdoor applications.  Use on surfaces with well-bonded, waterproof adhesive
and smoothing compound residues.
 
ESPECIALLY SUITABLE FOR
Use on surfaces with well-bonded, waterproof adhesive and
smoothing compound residues
 
PRODUCT PROPERTIES
Ready to use.
Excellent bond
Rapid drying
High coverage
Solvent-free
Indoors + Outdoor applications
 
BINDERS
Modified styrene-acrylate copolymers, wetting and antifoaming-agents, preservatives and water.

TECHNICAL DATA
Under normal conditions at 20°C
Packaging: Plastic bucket
Packsize: 20 kg (16L)  & 5 kg (4L)
Shelf-life: 12 months
Application Temp Range: +5°C - 35°C
Consumption: Approx. 12m² /1 Litre
Drying time: 4-6hours
Touch Dry: 15-20mins

APPLICATION
The surface should be sound and clean, also dried without any loose particles or contamination. Any debris should be completely removed by vacuum or thorough cleaning leaving the substrate ready for use.
The product can be diluted with water if required. The water proportion is based on the substrate situation (Note: If the existing substrate is ceramic tile, it should not be diluted)
Apply the primer evenly to fully cover the surface using a fine-pored foam roller.
Drying times: allow to dry to a clear, transparent, almost tack-free film. Dependant upon floor temperature and humidity, In favourable climatic conditions and on absorbent surfaces, a drying time of 1-3 hours is normally adequate