THOR905 form-A-guard offers an ideal protective solution for protecting your delicate surfaces.
 
Dimensions: 40metres in length x 750mm in width
 
form-A-guard is a triple layered, foam backed, nonabrasive surface protection product, which is suitable for protecting solid floors including engineered timber, hybrid flooring, laminate flooring, polished timber, parquetry, vinyl, tiles, slate, marble and polished concrete (sealed only). The form-A-guard is also suitable for the protection of kitchen and bathroom sinks, bench tops, vanity basins, bath tubs and shower bases.
 
Also recommended for use with the form-A-guard, is the THOR Edge/Membrane Tape and Joining Tape.  The THOR Edge/Membrane Tape is a low tack, clean release tape that can be applied directly to the perimeter of a cleaned surface area.  It is advised that periodic checks should be conducted on the THOR Membrane Tape after 1 month of application to ensure clean removal.
 
The THOR Joining Tape is a printed tape specifically designed for the joining of the form-A-guard and securing the edges directly to the THOR Edge/Membrane Tape.
 
T H O R form-A-guard is an Australian made product exclusively designed for the building and construction industry where protecting finished surfaces and eliminating defects is essential. Protecting from scratches and scuff marks for timber floors, tiled floors, vinyl, polished concrete (Cured Sealed Finished Surfaces), bench tops, bath tubs and shower bases.
 
THOR form-A-guard can be applied in the following 3 easy steps:
This quick and easy application ensures THOR form-A-guard remains a market leader in its category. *It is advised that periodic checks should be conducted on the THOR Edge/Membrane Tape after one month of application to ensure clean removal.

1. Apply THOR Membrane Tape to a cured, sealed or finished surfacethat is clean and free of any dust or residue.
2. Roll out the THOR form-A-guard to cover the cured, sealed or finished surface, overlapping each run
3. Use THOR Joining Tape to join the overlapped THOR form-A-guard. THOR Joining Tape can also be used to secure the edges of the THOR form-A-guard if required for prevention of dust or residue migration. If securing edges, apply a maximum 1 metre strip of THOR Joining Tape allowing a minimum of 1 meter spacing between runs and ensure the THOR Joining Tape is applied to the THOR Edge/Membrane Tape only.

THOR Joining Tape SHOULD NOT be applied directly to any finished surfaces as damage may occur.